|
|
|
Sold Nationwide
1-888-922-1622 |
|
Conventional Strapping Tools |
 |
Conventional Application, Regular Duty Strap: Medium
Duty tools for moderate tensioning and sealing of regular duty strapping.
These are imported tools and are very economical Strap Size Range:
3/8" to 3/4" wide up to 0.023" thick |
 |
Conventional Application,
Regular Duty Strap:
Tensioner: Model
M-1300, a more
durable tool for moderate to heavy usage, tensioning and sealing of regular
duty or lighter gauges of high tensile strapping. These are US built tools
and will perform better than most lower priced imports.
Sealers: Use the
M-1100 for
regular duty strapping and the M-1152 for
.022" to 0.025" thick high tensile strapping.
Strap Size Range:
3/8" to 3/4" wide up to 0.025" thick |
 |
 |
 |
Conventional Application, High Tensile Strap:
Economical tools for high tensile strapping. These are imported and are
intended for less demanding usage. Strap Size Range: 3/4" to
1-1/4" wide up to 0.035" thick |
 |
Conventional Application, High Tensile Strap:
US built tools, heavier duty for more demanding applications. The
M-1400 is for
moderate tension. It offers quick and unlimited take-up of strap. Choose
the M-1450
windlass style tensioner when exceptionally high tensioning is requires, as
for export loads using 1-1/4" strap. Strap Size Range: 3/4" to
1-1/4" wide up to 0.035" thick |
 |
 |
 |
Conventional Application, Regular Duty or High Tensile
Strap: Top of the line, manual combination tool. With the Titan
Model HKE, strap is tensioned by one handle, then sealed and cut with
the other handle. A
Sealless Joint, is made. You eliminate the on-going cost of metal
seals.
Parts Diagram. Strap Size Range: 1/2" to 3/4" wide, up to 0.025" HT |
 |
Conventional Application, Regular Duty or High Tensile
Strap: Top of the line, semi-pneumatic combination tool. With the
Titan
Model HPE, Strap is tensioned pneumatically, then sealed and cut
manually using a handle, similar to the HKE above. A
sealless joint is made. Strap Size Range: 1/2" to 3/4" wide,
up to 0.025" HT |
 |
Conventional Application, Regular Duty or High Tensile
Strap: Top of the line, fully pneumatic combination tool. The
Model PKE tensions the strap pneumatically, by depressing one button,
then seals and cuts the strap with the push of another button. A
sealless joint is made. Strap Size Range: 1/2" to 3/4" wide,
up to 0.025" HT |
|
Pusher Style Strapping Tools |
 |
Pusher Application, Regular Duty and High
Tensile Strapping: Tensioner: Model 1610 has unlimited
take-up. Front of tool pushes against the seal to accomplish the
tensioning. Must be used with
pusher seals.
Sealers: Use the
M-1100 for
regular duty strapping and the M-1152 for
.022" to 0.025" thick high tensile strapping.
Strap Size Range: 1/2" to 3/4" wide, up to 0.025" HT |
|
|
|
|
 |
Pusher Application, High Tensile Strap:
Similar in operation to 1610, can apply heavier tension and may be used with
heavier strapping. Requires
pusher seals. Sealer: Use Model
M-3100 for
strap a double crimp seal of 0.029" and above. The model M-3000 if a single
notch seal is preferred.
Strap Size Range: 3/4" to 1-1/4" wide,
up to 0.035" HT |
|
|
 |
Pusher Application, High Tensile Strap:
Tensioner: Top of the line Model HR-32, extra
heavy tensioner. Feedwheel design allows for unlimited take-up. Extra
heavy sealer, single notch.
Sealer: Top of the line
Model HHA, extra
heavy sealer. For the most demanding applications. Specify strap width
when ordering sealers.
Strap Size Range: 3/4" to 1-1/4" wide, up to 0.035" HT |
 |
 |
Pusher Application, High Tensile Strap:
PNEUMATIC TOOLS Tensioner: Top of the line pneumatic,
Model PR33, extra
heavy tensioner. Feedwheel design allows for unlimited take-up. Use with
pusher seals.
Sealer: Top of the line pneumatic,
Model SPZ, extra
heavy sealer. For the most demanding applications. Specify strap width
when ordering sealers.
Strap Size Range: 3/4" to 1-1/4" wide, up to 0.035" HT |
 |
 |
Pusher Application, Regular Duty and High Tensile
Strapping: Pneumatic operation,
Model PRF. Push
one button to tension the strap and another to make a seal and cut the strap
close to the seal. Fast and efficient. Strap Size Range: Tools
available for 1/2", 5/8" and 3/4" wide, up to 0.025" HT. Specify width when
ordering. |
|
 |
Pusher Application, High Tensile Strapping:
Pneumatic operation. Push one button to tension the strap and another to
make a seal and cut the strap close to the seal. Strap Size Range: Tools
available for 3/4", 1" and 1-1/4" wide straps, up to .035" thick. Specify
width when ordering. |
|
